Table of Contents
Advertisement
<Recorder Part> Applications
Defining a Preset PTZ
Position
When cameras are compatible with the PTZ (pan, tilt and
zoom) functions, you can set the preset position from this
unit.
Defining a Preset Position
Caution:
● The preset position may be displaced by a few degrees for
some cameras.
● The configurable items may differ according to the camera
in use.
● When using VN-V685U/VN-V686U/VN-V686BU Series,
the preset position cannot be registered if the electronic
zoom feature of a camera is functioning. Please take note
that no error message will be displayed in such a case.
During PTZ preset setting, set [EZoom Limit] to "1" from
[PTZ page] of VN-V685U/VN-V686U/VN-V686BU to
prevent registration by mistake. For VN-686BU Series
users, in addition, set [PTZ Type] to [Type 3] on this unit.
For details, refer to [INSTRUCRTIONS] of VN-V685U/VN-
V686U/VN-V686BU Series.
1
Click [+] in [Advanced Configuration]
2
Click [+] in [Hardware Devices] and click [+] for
the hardware device name of a PTZ camera
3
Double-click a camera name
The [Camera Properties] window appears.
39
Advertisement
Table of Contents
