Table of Contents
Advertisement
Item
Hardware Devices (Hardware Properties) (continued)
PTZ Device PTZ
settings
Fisheye
Fisheye
Preset Values
Connected
Select check box
cameras have
Do not select
Pan/Tilt/Zoom
check box
capabilities
PTZ type on
None
COM1
JCBP-S
PTZ type on
Pelco-P
COM2
Pelco-D
Camera
Type
Fixed
Moveable
Port
COM1
COM2
Port Address
0
Enable fisheye
Select check box
Do not select
check box
Fisheye license key
Description
Select this check box when a PTZ camera is included in
the cameras connected to the unit. If this check box is
not selected, the PTZ function is not available.
Select a control method suitable for PTZ camera(s) if
the camera is controlled through the COM1/COM2 port
of the network encoder (IP video server). Select [None]
when no PTZ cameras are controlled through the
COM1/COM2 port.
The camera name is displayed.
Select whether the camera is [Fixed] or [Moveable].
[Fixed]: Fixed camera
[Moveable]: PTZ camera
Available when [Moveable] is selected for [Type].
Select the control port of the network encoder (IP video
server) to control the PTZ function.
Available when [Moveable] is selected for [Type].
Specify the camera's port address. Normally, specify
the address as "0" or "1".
When series connection is applied for PTZ cameras,
the unit identifies the cameras by the port address.
Confirm the recommended setting for each camera
referring to the camera's instruction.
Select this check box to use the fisheye lens function.
For specifying the license key to use the fisheye lens
function.
● For details on purchasing a license key, consult our
authorized dealers or JVC KENWOOD service
center.
91
Advertisement
Table of Contents
