Table of Contents
Advertisement
<Recorder Part> Reference
Item
Camera (Camera Properties) (continued)
PTZ Preset
PTZ preview
Positions
Audio
(A Page 39)
selection
PTZ preset
positions
PTZ
Patrolling profiles
Patrolling
(A Page 41)
Patrolling list
96
Preset Values
^
^
Default
microphone
^
Default speaker
PTZ Type
Type 1 (stored on
server)
Type 2 (stored on
server)
Type 3 (stored on
camera)
^
Add New
^
Set New
Position
^
Delete
^
Test
^
^
Patrolling
Profiles
^
Add New
^
Delete
^
Preset Positions ^
^
Patrolling List
Wait time (sec.)
10
Transition time
5
(sec.)
Description
For directing the PTZ camera to any position.
This setting is applicable when microphones and/or a
speaker are used. Available microphones/speakers
vary depending on the camera.
Type 1 (stored on server): For setting and saving a
preset position on the server.
Type 2 (stored on camera): Click [Import/Refresh], then
read the preset position from the camera. The preset
position is saved on this unit.
Type 3 (stored on camera): Click [Import/Refresh]. The
preset position is imported from the camera and stored
on the camera.
Note:
● When using a JVC camera, it is recommended to
select the more positionally accurate [Type 3]. (Not
selectable depending on the camera.)
For adding a preset position you just set to the list.
For modifying a preset position selected in the list. Use
the PTZ preview screen to modify the position.
For deleting a preset position selected in the list.
For testing a preset position.
For displaying a defined patrol and creating a new
patrolling profile.
For displaying a defined patrolling profile.
For creating a new patrolling profile.
For deleting a patrolling profile selected in the list.
For editing the patrolling details.
For displaying a defined preset position on the selected
camera. Select a preset position you want to add to the
patrolling profile and click [
the profile.
For displaying a preset position registered with the
patrolling profile. To delete it from the patrolling profile,
select a preset position you want to delete and click
[
].
For specifying the period for which the camera stops in
each preset position.
For specifying the period for which the camera moves
between preset positions. During the period, motion
detection is disabled.
] and then it is added to
Advertisement
Table of Contents
