Table of Contents
Advertisement
<Recorder Part> Basics
Activating/Shutting Down
the System
The system can be activated/shut down.
Activating the System
1
Press the [OPERATE] button (with the system
shut down)
The system check starts and the Operate indicator blinks.
When the system check is completed, the Operate
indicator lights up and operations are enabled (the system
is activated).
Note:
● The system is automatically activated when the power
switch on the rear panel is turned "ON".
● When the login screen appears, enter the password to
login to the system. For details about setting the login
password, see "Setting the Password to Login to This
Unit" (A Page 85).
● If a login password is set, the warning message
(A Page 193) will not be displayed. In this case, the
[WARNING] indicator will light.
● If the [Smart Client] check box is selected in [StartUp
auto-display setting], (A Page 79) the Smart Client is
launched when you successfully login.
Shutting Down the System
1
Press and hold down the [OPERATE] button for
about 2 seconds to shut down the system
The shutting down operation starts and the Operate
indicator blinks. When the system is shut down, the
screen becomes blank and the Operate indicator is turned
off.
Note:
● The system can also be shut down by selecting [Shut
down] from [Start] button on the desktop.
● The system may also be activated/shut down from the
device connected to the [OPE ON/OFF] terminal on the
rear panel. (A Page 27 "[OPE ON/OFF]")
30
Using the On-screen
Keyboard
In addition to using a keyboard connected to the SERIAL
terminal on the front of this unit, characters may also be
entered using the on-screen keyboard.
1
Double-click the [Keyboard] button on the
desktop
The on-screen keyboard starts up.
2
Move the cursor over a character you want to
input and click the mouse button
Advertisement
Table of Contents
