JVC VR-X3200U Instructions Manual page 191

Camera (Camera Properties) (continued)
Event Notification Event Notification
Output Output activation
Motion Detection Motion detection
and Excluded
Regions
Exclude regions
PTZ Preset PTZ preset positions
Positions
PTZ Patrolling Patrolling list
PTZ scanning
Pause patrolling
PTZ on event Event
PTZ Preset Position
Cameras and Storage Information
Recording and Archiving Paths
Recording Recording Path
Archiving Path
Retention Time
Apply Template
Shortcut
Dynamic Path Selection – Archives
Dynamic path Enable dynamic path selection for archives
selection - All
Use
cameras
Drive
Path
Drive Size
Free Space
New UNC path
Item
Available events
Selected events
Configure events
Available output
On manual activation
On motion detected
Sensitivity
Motion
Motion detection interval
Enable
Show Grid
PTZ Type
Wait time (sec.)
Transition time (sec.)
(Speed)
Pause patrolling if motion is
detected
Resume patrolling ...
Item
Initial value
[None]
[None]
[None]
[None]
[None]
[None]
[40]
[640]
[240 milliseconds]
[Do not select check box]
[Do not select check box]
[None]
[10 seconds]
[5 seconds]
[Do not select check box]
[Medium]
[Do not select check box]
[30 seconds]
[None]
[None]
Initial value
[D:\MediaDatabase]
[Using dynamic path]
[7 Day(s)]
[Do not select check box]
[None]
[Do not select check box]
[None]
[None]
[None]
[None]
[None]
[None]
185