Table of Contents
Advertisement
The [Hardware Input Event Properties] window appears.
4
Click [+] of the hardware to configure settings
A list of input events specified in the hardware is
displayed.
5
Click an input event to enable
The applicable input event setting screen appears.
6
Select the [Enable event] check box
● Then the check box in the input event list is selected
and the event is enabled.
● To change the event name, enter [Event name].
7
Repeat Steps 5 and 6 for each input event to enable
Note:
● Some input events may not be selected at the same time.
8
Click [OK]
The input event has been configured.
Note:
● When you specify the event, specify the action for the
event. (A Page 52 to 56).
● When you select the setting to receive an e-mail when the
event you specified occurs, perform mail setup (A Page
60 "Mail Setup for Management Application") and activate
the setting to receive an e-mail upon the occurrence of an
event. (A Page 62 "Receive an e-mail upon the
occurrence of an event")
49
Advertisement
Table of Contents
