Table of Contents
Advertisement
<Recorder Part> Reference
HDD Maintenance
Checking HDD Usage
Displaying the HDD meter
You can check the usage of HDD(s) of this unit with the
meter.
1
Double-click the [2. HDD Meter] on the desktop
The HDD meter appears.
Changing HDD meter settings
You can specify the monitoring interval and HDD settings.
● Each drive is used for the purpose indicated below.
Drive
C
System disk
M
For saving temporary files of export
data.
L
For saving operation logs.
D or other
For saving recorded images.
than the
above
1
Click [Settings] in the HDD meter screen
2
Adjust the settings
128
Purpose
Item
Preset Values
Update
10 to 300
interval
seconds
Transparency 0 to 90%
^
Select
drives to
monitor
3
Click [OK]
Checking the Load Factor of This
Unit
This unit is equipped with a CPU meter, so you can check
the load factor of this unit from the meter.
When the load factor increases, malfunctions such as failure
to record images at the specified frame rate may occur.
1
Double-click the [1. CPU Meter] on the desktop
The CPU meter appears.
Yellow
Green
Red
Load factor below 5%:
Load factor below 60%: Lighting up in green
Load factor below 90%: Lighting up in green
Load factor over 90%:
Caution:
● When there is a red indication on the CPU meter,
decrease the load by, for example, lowering the
displaying/recording frame rate.
Description
For specifying the update
interval in seconds.
For specifying the
transparency of the HDD
meter.
Built-in HDD(s) and
recognized external
HDD(s) are listed.
Select HDD(s) to monitor.
Close
Grayed out
and yellow
Lighting up in green,
yellow and red
Advertisement
Table of Contents
