Table of Contents
Advertisement
4
Make the settings to receive images for each
camera
Item
Always on
Always receive images from the
camera.
Always off
Receive no images from the camera.
● Select the [Apply Template] check box and click [Apply]
to apply the settings selected in [Template - >] in the
upper part to all selected cameras.
5
Click [Next]
The frame rate setup screen appears.
6
Specify the frame rate and recording conditions
Description
Configure the following items in order.
Item
Live Frame Rate
For specifying frame rate for live
display.
Recording Frame
For specifying frame rate for
Rate
recording.
Record on
Set the recording conditions.
● Always: records constantly.
● Never: select when only recording
manually.
● Motion detection: records when
motion is detected.
● Event: records when an event
occurs.
● Event and motion detection:
records when an events occurs
and motion is detected.
Pre-recording/
For specifying units of seconds
Post-recording
before and after the motion/event
when recording is set to start by
motion detection or an event
occurring in [Record on].
● Select the [Apply Template] check box and click [Apply]
to apply the settings selected in [Template - >] in the
upper part to all selected cameras.
Caution:
● Be sure to set the frame rate so that the total frame rate
does not exceed the performance capacity of this unit. For
the performance of this unit, see ARecording/Displaying
live images/Distribution performanceB (A Page 194).
Note:
● [Event] or [Event and motion detection] in [Record on] is
displayed when an event is specified.
7
Click [Next]
Description
35
Advertisement
Table of Contents
