Configuring Basic Monitoring System Settings; Starting Up Management Application - JVC VR-X3200U Instructions Manual

<Recorder Part> Basics
Connect This Unit to a
Network (continued)
7
Enter the IP address, subnet mask, and default
gateway
● Default settings are indicated below. To set values
other than the default values, consult your network
administrator.
Item
IP address
LAN1 192.168.0.253
LAN2 192.168.1.253
Subnet Mask 255.255.255.0
Default gateway
LAN1 (None)
LAN2 192.168.1.254
Caution:
● Make sure to use LAN1 and LAN2 for different segments*.
Example:
LAN1: 192.168.0.253
LAN2: 192.168.1.253
* Segment: Underlined sections
8
Click [OK]
The network has been configured.
32
Default setting
Configuring Basic
Monitoring System
Settings
Configure monitoring system settings such as registering a
camera or record settings using Management Application.
Follow the instructions from the wizard of XProtect
Enterprise to configure basic settings.
Starting Up Management
Application
1
Double-click [Management Application] on the
desktop
The top screen appears.
Follow the instructions of the wizard to register cameras and
configure basic settings of the cameras and recording.
Note:
● Settings of [Adjust Motion Detection...] and [Configure
User Access...] should be configured only when it is
necessary. (A Page 44, A Page 66)