Events And Actions; Types Of Event And Action; Events Configuration-Generic Event - JVC VR-X3200U Instructions Manual

<Recorder Part> Applications

Events and Actions

This system can perform particular actions such as recording
start and camera direction change, triggered by reception of
particular signals from cameras. A triggering input is called
an "event" and a behavior triggered by the event is called an
"action."
With event and action settings, a certain action can be
activated when a certain event occurs by enabling the event
preset in a connected device in settings of this unit and
associating it with the action.

Types of Event and Action

Types of event and action are indicated below.
Event types
Event
Generic events Reception of particular character
(right column) strings (TCP/UDP format)
Input events
(A Page 48)
Manual events Events to be generated manually
(A Page 50) by using buttons, etc.
Timer events Events to stop action after a
(A Page 51) specified time from occurrence of
any of the above events
Action types
Action
Movement to PTZ The PTZ camera is moved to a
camera preset preset position defined for each
position (A Page 52) event.
Image distribution Images are distributed to defined
(Matrix) (A Page 53) recipient(s).
Record start Recording is started.
(A Page 55)
Output (A Page 56) Sends a signal to the alarm
device, etc.
46
Description
● Detection of camera motion
● Input to cameras or input port
on the rear panel of this unit
Description
Events Configuration—Generic Event
When character strings received by this unit match the
predetermined conditions, a generic event is triggered. The
following is the procedure for setup on this unit including
communication data reception setting. For outgoing data
setting, settings of sender devices such as cameras are
necessary.
1
Click [+] in [Advanced Configuration]
2
Click [+] in [Events and Output]
3
Double-click [Generic Events]