Table of Contents
Advertisement
Output Control on Event
Output on
Activate output
Event
on event
Configure events
Configure Output...
Scheduling and Archiving
Item
Scheduling All Cameras (A Page 119)
Schedule all cameras
Online
Speedup
E-mail
SMS
PTZ Patrolling
Apply Template (for each camera)
Scheduling Options
Scheduling options
Hardware device
communication
Archiving
Archiving time
Archive failure
notification
Item
Event
Output
Always off
Always on
None
Select check box
Do not select check box
Start cameras on
Select check box
client request
Do not select check box
Schedule profile
Always off
for new cameras
Always on
Maximum delay
10
between reconnect
attempts
^
Restore Default
12:00:00
Send e-mail on
Select check box
archive failure
Do not select check box
Send SMS on
Select check box
archive failure
Do not select check box
Preset Values
^
Set the combination of set events and outputs.
^
I/O input events
Select an event and click [Open] to display the
settings screen for the selected event.
Manual events
Generic events
^
Display the output settings screen (A Page 103
"Hardware Output").
Preset Values
For specifying options for Online, Speedup, Send e-
mail/SMS, and PTZ patrolling schedule for each
camera.
Note:
● This unit does not support notifications by SMS.
Select this check box to use a template when you
configure settings for each camera.
Select this check box to start the camera on request
from the viewer.
For specifying the default schedule value applied to
any new camera added.
● Default value varies depending on the camera.
For specifying the maximum delay for reconnect.
Reset the maximum delay time for reconnection.
For specifying the archiving time.
Select this check box to send an e-mail when any
failure occurs during archiving.
Note:
● This unit does not support notifications by SMS.
Description
: Initial value
Description
105
Advertisement
Table of Contents
