JVC VR-X3200U Instructions Manual page 101

Item
Camera (Camera Properties) (continued)
General archiving settings for all cameras
Configure
Dynamic
Paths...
Event Event
Notification notification
Output Output
activation
Motion Motion
Detection detection
and Exclude
Regions
(A Page 44)
Exclude
regions
Preset Values
Enable dynamic Select check box
path selection
Do not select check
for archives
box
Use Select check box
Do not select check
box
^
Drive
^
Path
^
Drive Size
^
Free Space
^
New UNC path
Available events Hardware
Manual
Generic
Selected events None
Configure Hardware input
events events
Manual events
Generic events
^
Available output None
On manual None
activation
On motion None
detected
Configure Hardware input
events events
Manual events
Generic events
^
Sensitivity 0 to 256
40
Motion 0 to10000
640
Motion detection 240 milliseconds For specifying the motion detection interval.
interval
Enable Select check box
Do not select
check box
Show Grid Select check box
Do not select
check box
Description
For configuring common archiving settings for all
cameras.
Select this check box to automatically select an
archiving destination drive from the registered list.
The registered archiving destination will be listed along
with the drive, path, capacity and free space.
Deselecting the [Use] check box will disable the
selection.
For specifying a drive path you want to register for
automatic selection by dynamic path.
You can view the yellow display in the title bar area on
the upper part of the live image display screen in case a
specific event occurs.
● Select an event from the [Available events] list and
move it to the [Selected events] list.
Select an event and click [Open] to display the settings
screen for the selected event.
For displaying the available output ports.
For specifying an output port to output when a specific
event or manual event occurs.
For specifying an output port to output when motion is
detected.
Select an event and click [Open] to display the settings
screen for the selected event.
For determining the level of change in the image pixel
that is to be recognized as motion. As the value is
decreased, the sensitivity is increased, and minor
changes in the pixels are recognized as motion.
For determining the number of pixels for which a
change is to be recognized as motion. When the slider
is moved from side to side, the black vertical line at the
bottom of the screen moves together, and the boundary
(Motion Sensitivity) is adjusted. When detected motion
exceeds the selected sensitivity level, the bar changes
from green to red, indicating a positive detection.
Select this check box to specify region(s) where the
motion detection is disabled.
Select this check box to show the grid on the preview
screen.
95