Table of Contents
Advertisement
5
Specify a display period in seconds
Item
A
Default carousel
For specifying units of seconds
time
common to multiple cameras, if
applicable.
B
Time for
For specifying a display period for
selected camera
cameras selected in the list in
seconds. Select the [Default] check
box to set the units of time set in
[Default carousel time].
C
Move Up/
For changing the order of the
Move Down
selected cameras.
6
Click [OK]
Note:
● The green frame indicates that the area in the frame is set
for the carousel feature.
Changing the Camera While the Carousel
Function is Active
On the live images screen, the following operation icons will
be displayed if you place the cursor in the bar of the camera
window set for the carousel function.
Item
Change the camera in the order
set for the carousel function.
Pause playback.
Description
Description
Enlarging Images of a
Selected Camera (Hotspot)
This section describes procedures to display a camera
selected in the view in the hotspot area. You can view an
enlarged view by setting a display area larger than the
others, i.e. [1] in the [1 + 7] layout, as a hotspot.
1
Click the [Setup] tab
2
Click [Hotspot] in the [System Overview] section
and drag to a preferred position in the view
3
Release the mouse button at a preferred
position
155
Advertisement
Table of Contents
