Table of Contents
Advertisement
Item
Frame Rate - MJPEG (continued)
Frame rate (MJPEG) (continued)
Speedup Frame Rate (continued)
Speedup on
Start Event
Stop Event
Apply Template
Camera
Frame Rate - MPEG
Frame rate (MPEG)
Live FPS
Record Keyframes
Only
Record All Frames on Motion detection
Start Event
Stop Event
Apply Template
Camera
Preset Values
Motion Detection
Set when the speed up setting is activated.
Event
Event and motion
detection
Schedule only
None
When [Speedup on] is set to [Event] or [Event and
motion detection], select the start/stop event.
Select check box
Select this check box to use a template when you
configure settings for each camera.
Do not select
check box
Note:
● Click [Select All] to select check boxes of all
cameras.
● Click [Clear All] to deselect check boxes of all
cameras.
Open
For displaying the [Camera Properties] window.
1 to 10, 15, 20
For specifying the frame rate in live display.
Note:
● The validated setting value differs depending on the
camera. Refer to the instruction manual of the
camera and confirm the validated setting value
before setting.
Select check box
Select this check box to record keyframes (I Frame)
only.
Do not select
check box
For selecting conditions for recording all frames.
Event
Event and motion
detection
Schedule only
None
For specifying an event to start recording and an event
to stop recording.
Select check box
Select this check box to use a template when you
configure settings for each camera.
Do not select
check box
Note:
● Click [Select All] to select check boxes of all
cameras.
● Click [Clear All] to deselect check boxes of all
cameras.
Open
For displaying the [Camera Properties] window.
Description
101
Advertisement
Table of Contents
