Table of Contents
Advertisement
<Recorder Part> Reference
Item
NAS Setting (A Page 73)
^
User name
^
Password
IP Lease Setting
IP Lease feature
Enable IP Lease
Do not select check
box
Select check box
Delete past IP
information
Lease period
Limited (24H)
Parameters
Head IP address
Number
1 to 99 units
Subnet mask
Gateway
Primary DNS
Secondary DNS
^
Domain name
SNMP Setting (A Page 124)
Enable SNMP
Select check box
Enable TRAP
Select check box
^
SNMP Manager IP
address
^
Community name
Monitoring interval
CPU Load
10 to 9999 seconds
D drive writing
30 to 9999 seconds
rate
Smart Client
10 to 9999 seconds
Camera status
60 to 9999 seconds
Copy extended MIB file to flash memory
80
Preset Values
For configuring settings for NAS connection.
For specifying the user name for NAS connection.
For specifying password for NAS connection.
For configuring settings to assign IP addresses to each network camera from
this unit.
Note:
● In order to assign the IP address of the network camera using the IP
Lease feature, you need to enable the DHCP of the network camera. For
procedures to enable the DHCP of the network camera, refer to the
instructions of the network camera.
● If the network uses more than one of this unit, enable the IP lease function
only for one unit. Also, do not enable the IP lease function when any DHCP
server is running on the same network. Enabling the IP lease function for
more than one unit may cause IPs to be fixed, leading to malfunction of
cameras.
Select check box
Set whether to assign IP addresses to each network camera from this unit.
Select this check box to delete past IP information of each network camera
and to assign the new IP address.
Do not select
check box
Unlimited
For specifying the valid period of the IP address assigned to the cameras.
192.168.0.100
For specifying the first IP address to be assigned to the network cameras.
For selecting the number of IP addresses to be assigned to the cameras.
The selected number of IP addresses will be assigned starting from the first
20Units
IP address.
255.255.255.0
For specifying the subnet mask for the cameras.
192.168.0.254
For specifying the gateway for the cameras.
192.168.0.253
For specifying the primary DNS for the cameras.
192.168.0.252
For specifying the secondary DNS for the cameras.
For specifying the domain name for the cameras.
You can monitor the status of this unit from the SNMP manager on the
surveillance computer.
Select this check box to enable the SNMP function.
Do not select
check box
Select this check box to enable the TRAP function.
Do not select
check box
Specify the IP address of the SNMP manager.
Specify the SNMP community name.
(1 to 32 characters. Alphanumeric characters only.)
Specify the interval to monitor CPU usage.
10 sec
Specify the interval to monitor the writing rate to the D drive.
60 sec
Specify the interval to monitor the startup status of the Smart Client.
10 sec
Specify the interval to monitor the connection status of the camera.
60 sec
Copy the MIB extension information into a USB flash memory.
● For details on SNMP settings, refer to "Setting SNMP" (A Page 124).
Description
Advertisement
Table of Contents
