Table of Contents
Advertisement
Events and Output
Ports and Polling
Ports and
Alert and generic event port
polling
SMTP event port
FTP event port
Polling interval [1/10] second
Hardware Input Events (A Page 48)
(Hardware
Event
Device name)
configuration
Pre/post alarm
images
E-mail
notification
SMS notification
System motion
detection event
Hardware Output (A Page 56)
(Hardware
Output Settings
Device name)
Item
Enable event
Event name
Images from
camera
Number of pre-
alarm images
Frames per
second
Send e-mail if
this event
occurs
Attach image
from camera
Send SMS if
this event
occurs
Create a
system motion
detection event
for the camera
Output name
Output
connected to
Keep output for For specifying the output holding time in units of 1/10 seconds or
Test Output
Preset Values
1 to 65535
For specifying a port number to handle a warning
triggered by an event, such as a generic event.
1234
1 to 65535
For specifying a port number to send event
information from a device to the monitoring
25
system via SMTP.
1 to 65535
For specifying a port number to send event
information from a device to the monitoring
21
system via FTP.
10 (1 sec)
For some devices, the monitoring system must
check the status of device input port to detect
whether or not the input has been received. Such
regular status check is referred to as "polling."
● For I/O devices, set the polling interval as
short as possible.
● For devices that require polling, refer to the
relevant instruction manuals for I/O devices.
Select check
Select this check box to use the event function.
box
Note:
● The following setting items vary depending on
Do not select
check box
selected events.
For specifying an event name.
● The following characters cannot be used. < > & ' " \ / : * ?
^
For selecting cameras to acquire images.
3
For specifying the number of images to acquire.
1
For specifying the number of image frames.
Select check box
Select this check box to send an e-mail when an
event occurs.
Do not select
check box
Select check box
Select this check box when you attach an image
to the e-mail, and select an image source by
Do not select
using the pull-down menu.
check box
Select check box
Note:
● This unit does not support notifications by
Do not select
check box
SMS.
Select check box
Select this check box when you create an event
to be triggered by motion detection.
Do not select
check box
For specifying a name for the output.
● The following characters cannot be used. < > & ' " \ / : * ?
For selecting which destination to connect the output to.
seconds.
Click this to perform a test on the output settings.
: Initial value
Description
|
[ ]
|
[ ]
103
Advertisement
Table of Contents
