Color Filter - Sharp IV-C35M User Manual

Relationship between the camera selection and the monitor output
Select camera on the
"MEA-CND" menu
CAM1&2
CAM1&NG-IMG

[2] Color filter

Color filter is to filter red, green, blue, brightness, or optionally, the captured image, and display the filtered
color as bright gray.
Then, the controller measures these gray images with conventional measurement.
Filter types
R (red) filter Displays red areas more brightly.
G (green) filter Displays green areas more brightly.
B (blue) filter Displays blue areas more brightly.
Displays areas that are within the specified brightness range (within the specified
Brightness filter
upper and lower limits) more brightly.
Specify the optimum color filter parameters to use, based on the original image
Custom filter
conditions.
The color filter function can be used with positional deviation measurement, degree of match inspection,
lead inspection, BGA/CSP inspection, area measurement by binary conversion, object counting by binary
conversion, object identification by binary conversion, point measurement, multiple position
measurement, multiple degree of match inspection, and fault inspection.
Effect of the color filter
Original color image
Image after red filtering
Image after brightness
filtering
"MONITOR OUTPUT" on the
"TYPE RUN COND" menu
CAM1
CAM2
CAM1&2
CAM1&2 (VERT)
CAM1&2(HORIZ)
CAM1
NG-IMG
CAM1&NG-IMG
CAM1&NG-IMG (VERT)
CAM1&NG-IMG(HORIZ)
Image after blue filtering
Image after custom filtering
3-5
Setting the Conditions for Each Object Type
Image after green filtering
3