Monitor Output - Sharp IV-C35M User Manual

Setting the Operating and System Conditions

[1] Monitor output

When two cameras have been connected to IV-
C35M, you can switch back and forth between the
image from the cameras on one monitor. Also, the
2
monitor screen can be divided into two parts to
display the two images simultaneously.
- Purpose of the setting
To set the conditions in which an image captured
during measurement will be displayed on the
operation screen.
- Output monitor switching
There are two methods for changing the monitor
output: change the TYPE RUN COND settings, use
external input signals through the parallel port to
make changes from outside.
(1) Change the monitor output by changing the TYPE RUN COND settings
Select the "
item from the popup menu.
1MONITOR OUTPUT
CAM1
CAM2
CAM1&2(HORIZ)
CAM1&2(VERT)
Display examples on the operation screen
- Camera 1 on the whole screen
(When "CAM1" has been specified in item
1MONITOR OUTPUT.)
- Simultaneous display on a divided screen
(When "CAM1&2(HORIZ)" has been specified
in item "1MONITOR OUTPUT.")
MONITOR OUTPUT" item on the "TYPE RUN COND" screen and then select an
Display the camera 1 image on the whole screen.
Display the camera 2 image on the whole screen.
Display the camera 1 image on upper half, and the camera 2 image
on lower half.
Display the camera 1 image on left half, and the camera 2 image on
right half.*
COLOR F C1 H
SERIAL NO.
8F053G26
MODEL
IV - C35M
COLOR F CH H
SERIAL NO.
8F053G26
MODEL
IV - C35M
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
CAM1
2CAPTURE IMG
PARTIAL-IMG
3MESSAGE DISPLAY
YES(NUMERIC)
4PATTERN DISPLAY
YES
5SHOW BINARY IMG
YES
6SHOW
FIX IMG YES
7OPS MAIN DISP
YES
8DISP CHG-EVAL
NO
9PC-MNTR
NO
0THROUGH DISPLAY
NO
qEXTENSION FUNC.
NO
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
Description
- Camera 2 on the whole screen.
(When "CAM2" has been specified in item
1MONITOR OUTPUT.)
- Simultaneous display on a divided screen
(When "CAM1&2 (VERT)"
in item "1MONITOR
SERIAL NO.
8F053G26
MODEL
IV - C35M
Camera 1 image
2-2
COLOR F C1 BRT
CAM1
CAM2
CAM1&2(HORIZ)
CAM1&2(VERT)
COLOR F C2 H
has been specified
OUTPUT.")
Camera 2 image