Computer Link - Sharp IV-C35M User Manual

Setting the Input/Output Conditions

21-5 Computer link

When "PC-LINK" has been specified in item "
(page 17-1), the computer link conditions must be set on the "COMPUTER LINK" screen.
How to display the computer link setting screen
How to display the computer link setting screen
Select "MAIN COND" -> "SYS-CND" ->
"COMPUTER LINK," in that order.
The "COMPUTER LINK" screen will appear.
How to set up a computer link
PC MANUFACTURER,
WRITE TOP ADRS
The details for "
STATION NO.," and "
ADRS" are as follows.
Item
Station No.
Write address
(max. 512 bytes)
* In this book, octal notation is indicated by adding
CONTROL PROC. ,
When "MITSUBISHI" is selected on the "
MANUFACTURER" line, specify
" CONTROL PROC." and "
COMMAND."
Menu
4 CONTROL
PROC.
5 BLK WRT
COMMAND
21
See "Chapter 23: Computer Link" for applicable models made by these manufacturers.
Note 1: Use an even address as the write start address.
Note 2: When 512 bytes are used for a write register on a Sharp model, select a write start address
from the following addresses.
09000, 19000, 29000, 39000, 49000, 59000, 69000, 79000, 89000 , 99000
STATION NO.,
PC MANUFACTURER,"
WRITE TOP
Setting range
- Sharp: 00 to 37 *
(8)
- Mitsubishi: 00 to 31
- OMRON: 00 to 31
- Yokogawa: 01 to 32
- Sharp: 09000 to 99776
- Mitsubishi: D0000 to D9999
- OMRON: DM0000 to DM9999
- Yokogawa: D00001 to D16384
BLK WRT COMMAND
BLK WRT
Setting details
FORM 1: No line terminator
FORM 4: With line terminators
"CR" + "LF"
WW: Data writing address range
D0000 to D1023
QW: Data writing address range
D000000 to D008191
OUT I/F (PARAL.)" on the "I/O CONDITIONS" screen
SELECT SYSTEM COND
SYS-CND
I/O CONDITIONS
COMM.SET
COMPUTER LINK
GAIN-OFFSET
TIME
CAMERA TYPE
COMPUTER LINK SCREEN COND SAVE
1PC MANUFACTURER SHARP(COMMPORT)
2STATION NO.
01
3WRITE TOP ADRS
09000
(8).
COMPUTER LINK SCREEN COND SAVE
PC
1PC MANUFACTURER
2STATION NO.
3WRITE TOP ADRS
4CONTROL PROC.
5BLK WRT COMMAND
21-24
COLOR F C1 BRT
1PC MANUFACTURER
2STATION NO.
3WRITE TOP ADRS
4CONTROL PROC.
5BLK WRT COMMAND
COLOR F C1 BRT
SHARP(COMMPORT)
SHARP(LINK-MDL)
MITSUBISHI
OMRON
YOKOGAWA
COLOR F C1 BRT
MITSUBISHI
00
D0000
FORM1 FORM1
FORM4
WW
WW
QW