Sharp IV-C35M User Manual page 233

Set the evaluation conditions
How to move to the evaluation condition setting screen
There are two methods for getting to the evaluation condition setting screen.
1) Select "COND" in the upper function menu on
the "MEAS COND (or REG COND)" screen
and press the SET key. Select
"EVALUATION" on the pop up menu to go to
the "EVALUAT COND" screen.
2) Move the cursor to the "EVALUATION COND"
item on the menu tree screen and press the
SET key.
The "EVALUAT COND" (evaluation conditions)
screen will appear.
For details about the evaluation conditions,
see page 3-28.
Multiple Degree of Match Inspection
MEAS CND SCREEN COND SAVE
1DTECT PRECISION
STANDARD
2
0(0~3)
3
YES
4MATCHING
AVG-GRAYS
5DETECT ORDER
SCAN-ORDER
6
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS01(MULTI MATCHES F)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
EVALUAT COND SCREEN COND SAVE EDIT SEL
1REGISTER NO.
2CONDITION SET
3NUMBER OF OBJ
4DTECT NUMBER
5MATCH LVL
6GRAY LVL
X COORD.
Y COORD.
7TEST
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
16-7
RED F C1 BRT
IMG PRE-PROC
REG-COND
EVALUATION
DST&ANGL
NUM-CALC
OUT
COLOR F C1 BRT
1REGISTER NO.
2CONDITION SET
3NUMBER OF OBJ
4DTECT NUMBER
5MATCH LVL
6GRAY LVL
7TEST
IMG PRE-PROC
MEAS CND
REG-COND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
RED F C1 BRT
0COND.1 [TEST RESULT] [OUTPUT]
AUTO( 10%)
000~128 K= NO
000(0~000)
-10000~+10000 M0= NO
000.0~255.0 G0= NO
X0=
Y0=
EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)