Sharp IV-C35M User Manual page 240

Fault Inspection
Set the evaluation conditions
How to move to the evaluation condition setting screen
There are two methods for getting to the evaluation condition setting screen.
1) Select "COND" in the upper function menu
on the "MEAS CND" (or "REG CND")
screen and press the SET key. Select
"EVALUATION" on the pop up menu to go
to the "EVALUAT COND" screen.
2) Move the cursor to the "EVALUATION
COND" item on the menu tree screen and
press the SET key.
17
The "EVALUAT COND" (evaluation
conditions) screen will appear.
For details about the evaluation
conditions, see page 3-28.
MEA-CND SCREEN COND SAVE
1REGISTER NO.
0 (0 7)
2MODE
PROXIMITY DIFFERENCE
REGISTER NO.
00 01
3MEAS OBJECT
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
EVALUAT COND SCREEN COND SAVE EDIT SEL
1REGISTER NO.
0 (0 7)
2CONDITION SET
AUTO (±10%)
3MAX-GRAYS-DIFF
000. 0
4MAX-GRAYS
000. 0
5MIN-GRAYS
000. 0
6TEST
EXEC (WITH-POSI. ADJ WITHOUT-POSI. ADJ)
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
17-6
RED F C1 BRT
02 03 04 05 06 07 08 09 10 11 12 13 14 15
IMG PRE-PROC
REG COND
EVALUATION
NUM-CALC
OUT
1REGISTER NO.
2CONDITION SET
3MAX-GRAYS-DIFF
4MAX-GRAYS
5MIN-GRAYS
6TEST
COLOR F C1 BRT
[TEST RESULT] [OUTPUT]
255.0 SG= NO
255.0 MXG= NO
255.0 MNG= NO