Sharp IV-C35M User Manual page 261

Numerical Calculations
"CHG-CALC"
Move the cursor to the "CHG-CALC" item. Each time you press the SET key the display in the
left most column will alternate between "N00 to N07" and "N08 to N15."
RUN A TEST
Pressing the SET key will store the setting details as well as run a test
The numerical results of the tests will be displayed at position [F] and the OK or NG judgment
will be displayed at position [E].
A: TYPE
Select the type of data being calculated.
B: FORMULA
A number of style settings are used. The style type is selected using the left and right keys and
the numerical values are entered using the up and down keys.
The details displayed for "FORMULA" will depend on the "TYPE" selected.
MEAS-CAL-RESULT[N]
A-CAL-RESULT[AN]
NUM-CAL[NC]
CNST[C]
Note: When "SUM" (total) or "AVG" (average) is selected for calculating the results, specify the
C: UPR&LOW LIMIT
Enter the upper and lower limits for making a judgment
D: OUTPUT
Setting the output of the calculation results.
Based on the settings at items "TYPE" and "FORMULA," the number of styles may be entered
as follows.
OBJECT TYPE
MEAS-CAL-RESULT [N]
(Results of the calculations
for measurements)
A-CAL-RESULT [AN]
(Results of final calculations)
NUM-CAL [NC]
(Numerical calculations)
CNST [C] (Constant)
19
Selected of type
range from 0 to 15.
01N00 to 01N15 (Calculation result for measurement 0, camera 1: N00 to 15)
02N00 to 02N15 (Calculation result for measurement 0, camera 2: N00 to 15)
10N00 to 10N15 (Calculation result for measurement 1: N00 to 15)
20N00 to 20N15 (Calculation result for measurement 2: N00 to 15)
30N00 to 30N15 (Calculation result for measurement 3: N00 to 15)
40N00 to 40N15 (Calculation result for measurement 4: N00 to 15)
AN00 to AN15
ABS /
MAX/MIN (00 to 15)
-9999999.9999 to +9999999.9999
Formula
OBJECT TYPE, CNST, SUM, AVG, CBP,
CBM, DEL
ABS, SQRT, TAN, ATAN, MAX, MIN, DEL
+0000000,000 (second line is not displayed)
Number of styles
/ TAN / ATAN (00 to 15)
19-12