Sharp IV-C35M User Manual page 158

WINDOW
Select a window type. On the popup menu,
move the cursor any of "NUM-OF-
MASK1,2,4," "BINARY-IMG-MASK," or
"POLYGON," and press the SET key to
select the item.
NUM-OF-MASK 1
NUM-OF-MASK 2
NUM-OF-MASK 4
BINARY-IMG-MASK
POLYGON
REGISTER NO.
Select register number to measure. Number of selectable registers varies with window shape
selected.
NUM-OF-MASK 1
NUM-OF-MASK 2
NUM-OF-MASK 4
BIMARY-IMG-MASK 0 only
POLYGON
To save the measurement conditions using a different register number, press the SET key and
highlight the number. Change this number by pressing the up and down arrow keys.
REGISTER EXIST
Select whether to register or not.
REGISTER NO. ( BIN AREA COND)
Register setting conditions are shown for each register number. Circles mean that "REGISTER
EXIST" has set to "YES."
Æ Setting (display) of binary area conditions
REGISTER NO.
4BIN AREA COND
1
2REGISTER NO.
3REGISTER EXIST
4BIN AREA COND
Bring one mask area inside the measuring area.
Bring two mask areas inside the measuring area.
Bring four mask areas inside the measuring area.
Select this item if the captured image is other than a rectangle, circle, or
ellipse. This function masks the captured image using a stored binary
image.
- For details, see pages 3-37 to 42.
You can manually create any freeform polygon for the measurement area.
0 to 15
0 to 7
0 to 4
0 only
When item "3REGISTER EXIST" is
No setting set to "YES," a circle is displayed.
8-3
Area Measurement by Binary Conversion
MEA-CND SCREEN COND SAVE
NUM-OF-MASK 1
00(0 15)
YES
REGISTER NO.
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
NUM-OF-MASK 1
NUM-OF-MASK 2
NUM-OF-MASK 4
BINARY-IMG-MASK
POLYGON
8