Table of Contents
Advertisement
Set the evaluation conditions
How to move to the evaluation condition setting screen
There are two methods for getting to the evaluation condition setting screen.
1) Select "COND" in the upper function menu on
the MEA-CND (or REG COND) screen and
press the SET key. Select "EVALUATION" on
the pop up menu to go to the EVALUAT
COND screen.
2) Move the cursor to the "EVALUATION COND"
item on the menu tree screen and press the
SET key.
The "EVALUAT COND" (evaluation conditions)
screen will appear.
For details about the evaluation conditions,
see page 3-28.
Object Counting by Binary Conversion
MEA-CND
SCREEN COND SAVE
1WINDOW
BINARY-IMG-MASK
2REGISTER NO.
0
3REGISTER EXIST
YES
4MASK BINARY IMG REF-IMG
5BIN IMG MASK
(TO NEXT SUB-MENU)
REGISTER NO.
6BIN AREA COND
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE01
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-DEVIATION
MEAS01(CNT-BIN-OBJ F)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
EVALUAT COND SCREEN COND SAVE EDIT SEL
1REGISTER NO.
2CONDITION SET
3NUMBER OF OBJ
4TOTAL AREA
5TEST
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
9-7
RED F C1 BRT
IMG PRE-PROC
REG COND
EVALUATION
NUM-CALC
OUT
COLOR F C1 BRT
1REGISTER NO.
2MEAS SHAPE
3MEAS AREA
4THRESHOLD
5INVERT B/W
IMG PRE-PROC
MEAS CND
REG-COND
EVALUATION COND
NUM-CALC
OUT-COND
RED F C1 BRT
0(0~3)
[TEST RESULT]
[OUTPUT]
AUTO( 10%)
0000~3000
K=
NO
000000~245760 A=
NO
EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
9
Advertisement
Table of Contents
Troubleshooting
