Θ Angle Correction Image Display - Sharp IV-C35M User Manual

Setting the Operating and System Conditions
[6] θ θ θ θ θ angle correction image display
Select "YES" or "NO" to display a θ angle corrected
image on the operation screen.
2
SHOW SHOW
FIX q IMG FIX q IMG
A q angle corrected image will be A q angle corrected image will be
YES YES
displayed on the operation screen. displayed on the operation screen.
A q angle corrected image will not be A q angle corrected image will not be
NO NO
displayed on the operation screen. displayed on the operation screen.
Display examples
- When the q angle correction - When the q angle correction
image display mode has image display mode has
been set to YES. been set to YES.
- When the q angle correction - When the q angle correction
image display mode has image display mode has
been set to NO. been set to NO.
Description Description
(Reference image) (Reference image)
TYPE RUN COND SCREEN SAVE TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT 1MONITOR OUTPUT
CAM1 CAM1
2CAPTURE IMG 2CAPTURE IMG
PARTIAL-IMG PARTIAL-IMG
3MESSAGE DISPLAY 3MESSAGE DISPLAY
YES(NUMERIC) YES(NUMERIC)
4PATTERN DISPLAY 4PATTERN DISPLAY
YES YES
5SHOW BINARY IMG 5SHOW BINARY IMG
YES YES
6SHOW 6SHOW
FIX IMG FIX IMG YES YES
7OPS MAIN DISP 7OPS MAIN DISP
YES YES
8DISP CHG-EVAL 8DISP CHG-EVAL
NO NO
9PC-MNTR 9PC-MNTR
NO NO
0THROUGH DISPLAY 0THROUGH DISPLAY
NO NO
qEXTENSION FUNC. qEXTENSION FUNC.
NO NO
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
(Measured image) (Measured image)
Position of Position of
reference image reference image
2-8
COLOR F C1 BRT COLOR F C1 BRT
YES YES
NO NO