Sharp IV-C35M User Manual page 191

REGISTER NO.
Select register number to measure. When
making color unevenness inspection, you
can select any register from 0 to 3 (a total of
4 registers).
REGISTER EXIST
Select whether to register or not.
REGISTER NO. ( MEAS OBJECT)
Register setting conditions are shown for each register
number. Circles mean that "REGISTER EXIST" has set to
"YES."
How to set the register conditions
How to enter the REG-COND setting screen
There are three methods for getting to the REG-COND setting screen.
1) On the "MEA-CND" setting screen, move the
cursor to the " MEAS OBJECT" and press
the SET key. The cursor will move into the
table. Move the cursor to the " " column and
press the SET key.
Note: If you press the SET key in the "X"
column, the setting will be invalid.
Color Unevenness Inspection
MEA-CND SCREEN COND SAVE
1REGISTER NO.
0 (0 3)
2REGISTER EXIST
YES
REGISTER NO.
00 01
3MEAS OBJECT
EXTRACT COLOR
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
MEA-CND SCREEN COND SAVE
1REGISTER NO.
0 (0 3)
2REGISTER EXIST
YES
REGISTER NO. 00 01
3MEAS OBJECT
EXTRACT COLOR
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
12-3
COLOR F C1 BRT
YES
NO
02 03 04 05 06 07 08 09 10 11 12 13 14 15
COLOR F C1 BRT
02 03 04 05 06 07 08 09 10 11 12 13 14 15
12