Sharp IV-C35M User Manual page 212

Point Measurement
STORE BLOCK OF POINTS
Press the TRG/BRT key to move the cursor to the upper function menu. Select "DETAIL" and press
the SET key. Select "STORE BLCK OF PNTS" from the popup menu and press the SET key. Now,
items
This function is used to set a group of points at the same time, after specifying the number of points
horizontally and vertically and their spacing.
REGISTER NO.
When "AND" or "OR" is selected on the
" EVALUATION" line, select "YES" at the
REGISTER NO" item. Then, "
LEFT" will be displayed.
UPPER LEFT
Specify the coordinates of the upper left
corner of the block you want to register.
BLOCK ARRANGEMENT
Enter the number of points along the X
(horizontal) and Y (vertical) axes.
BLOCK SPACING
Specify the distance between the points in
the horizontal and vertical rows.
STORE BLCK OF PTS
Select "EXEC" and press the SET key to register the block.
DEL BLOCK OF PTS
Delete all the points that were registered at the same time.
MOVE BLOCK OF PTS
Move the group of points that were registered at the same time.
14
Example of a block registration
to will be displayed on the "REG COND" menu.
Set the starting point in item
Enter 002 (vertical) · 003 (horizontal) in item "6BLOCK ARRANGEMENT,"
and enter the vertical (Y) and horizontal (X) intervals in item
"7BLOCK SPACING." Then select item "8STORE BLOCK OF PTS"
to store the settings for the block.
REG COND SCREEN COND SAVE DETAIL RED
1
2EVALUATION
UPPER
3EVAL-SPEC(RATIO )
4REGISTER NO.
5UPPER LEFT
6BLOCK ARRANGEMENT
7BLOCK SPACING
8STORE BLCK OF PTS
9DEL BLOCK OF PTS
0MOVE BLOCK OF PTS
SEL=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
5
above.
14-6
F C1 BRT
~32)
STORE BLCK OF PNTS
MAJORITY
050
NO
000(0~255)YES
YES
MOVE(224.208)
Y001 X001
Y004 X004
EXEC
EXEC
MOVE(224.208)
X X
Y