Sharp IV-C35M User Manual page 19

The brightness of the captured image can be set to one of two levels.
Screen
display
BRT Display the captured image without changing its brightness.
DRK Display the captured image at 1/2 the actual brightness
How to select the brightness level
On any screen, except the operation screen, move the cursor to the "F" (freeze) or "T" (through)
position on the upper part of the screen by pressing the SEL key. Then, press the left or right arrow key
to move the cursor to the "BRT" (bright) or "DRK" (dark) indicator. Press the up or down arrow key to
switch between bright and dark.
Displays the software version.
Displays the measurement time currently assigned.
(Only when changing the object type)
Time to change CCD exposure time
object type (Shutter operation time)
- Serial communication time is not included.
- Set the controller as follows to reduce the measurement time.
1. Increase the shutter speed.
2. Select the "partial" image capture feature for the CCD.
3. Select "NO" for the measurement results display (message display, pattern display, and binary
image display).
Display setting details of each measurement.
MEASURE 0
Measurement Camera 1 or
numbers from 0 to 4
Displays the status of input relays X0 to X7: OFF [
Displays the status of output relays Y0 to Y7: OFF [
Displays the status of the ready output: OFF [
The menu bar at the bottom has two rows. When this menu is selected, the second row will appear.
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
MNU-CHG NEXT-NG CHG-C1 CHG-C2 MANL-MEAS SHORTCUT
The details of each item on this menu bar are shown on the next page.
Description
Actual measurement time
CCD image
capture time processing time
CAM1 NO
Measurement
camera 2 program name
], ON [
1-11
Setting and Operating Outline
Image Result output
time
], ON [ ].
], ON [ ].
].
1