Connecting The Operation Panel Using A Connection Cable - Mitsubishi Electric FR-A700 Instruction Manual

Connecting the operation panel using a connection cable

3.5 Connecting the operation panel using a connection cable
When connecting the operation panel (FR-DU07) to the inverter using a cable, the operation
panel can be mounted on the enclosure surface and operationally improves.
Connection cable
Operation panel
FR-DU07
NOTES Overall wiring lenght when the operation panel is connected: 20m.
Using the PU connector, the frequency inverter can be connected to a RS-485 interface of a
personal computer, etc. (refer to section 6.23).
3 - 30
FR-A5 CBL
Operation panel connection connector
FR-ADP (option)
Fig. 3-22:
Connecting the operation panel using a
connection cable
Wiring
I001032E