Mitsubishi Electric FR-A700 Instruction Manual page 615

Parameter
Communication operation com-
mand source (Pr. 338)
Operation
Location
Communication speed command
Selection
source (Pr.339)
S-pattern acceleration/decel-
20 X20
eration C switchover
22 X22 Orientation command
23 LX Pre-excitation
Output stop
PU operation interlock
24 MRS
25 STOP Start self-holding selection
26 MC Control mode swichover
27 TL Torque limit selection
Start-time tuning start exter-
28 X28
nal input
37 X37 Traverse function selection
42 X42 Torque bias selection 1
43 X43 Torque bias selection 2
44 X44 P/PI control switchover
50 SQ Sequence start
60 STF Forward rotation command
61 STR Reverse rotation command
62 RES Reset
63 PTC PTC thermistor input
64 X64 PID forward action switchover
65 X65 PU-NET operation switchover
External-NET operation
66 X66
switchover
67 X67 Command source switchover
Conditional position pulse
68 NP
train sign
Conditional position droop
69 CLR
pulse clear
DC feeding operation
70 X70
permission
71 X71 DC feeding operation cancel
Tab. 6-128: Writing operation and speed commands (2)
Explanation of table:
External:
NET:
Combined:
—:
Compensation: Control by signal from external terminal is only valid when
NOTE The control source of communication is as set in Pr. 550 and Pr. 551.
FR-A700 EC
0: NET
1:
0: NET Exter-
nal
NET
Combined
NET
NET
NET
Operation is valid only from external terminal signal.
Control only from communication is valid.
Operation is valid from either of external terminal and communication.
Operation is invalid from either of external terminal and communication.
Pr. 28 "Multi-speed input compensation selection" = 1
Selection of operation mode and operation location
1: External
2: 1:
Exter- 0: NET Exter-
nal nal
External
External
External
— External
External
External
External
External NET
External
External
Remarks
2:
Exter-
nal
Pr. 79 ≠ 7
Pr. 79 = 7
When X12 signal is
not assigned
External
6 - 435