Mmc: 103 Set Answer Mode - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 103
3 3
DCS
Allows the system administrator to change the answer mode of any keyset. Each keyset can
have its answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by pressing
the ANS/RLS key or by lifting the handset.
1. AUTO ANSWER: After giving a short attention tone, the keyset will automatically answer calls
on the speakerphone. When a C.O. line is transferred to a keyset in Auto Answer mode, the
screened portion of the call will be Auto Answer, but the keyset will ring when the transfer is
complete if the user has not pressed the ANS/RLS key or lifted the handset.
2. VOICE ANNOUNCE: The keyset will not ring. After a short attention tone, callers can make an
announc ement but the ANS/RLS key or hand set must be used to answer calls.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Open programming and select 103
Display shows
2. Dial keyset number (e.g., 205)
OR
Press UP or DOWN to select keyset
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select All
3. Dial 0, 1 or 2 to change ring mode
OR
Press UP or DOWN to select ring mode and
press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
SET ANSWER MODE
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
All keysets = RING
Ring frequency default = 5
MMC 111 Keyset Ring Tone
MMC 103 (Page 1 of 1)
3 3 3 3 408i
816
DISPLAY
[201] ANS MODE
RING MODE
[205] ANS MODE
RING MODE
[ALL] ANS MODE
?
[205] ANS MODE
VOICE ANNOUNCE
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408