Mmc: 720 Copy Key Programming - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 720
3 3
DCS
For duplicating key assignments from one keyset to another. This can be done on a per-station
basis or on all stations, but not on a group of stations. A limitation is that the original and target
keysets must be of the same type, e.g. both 24B keysets or both 12B keysets. A further condition
is that a Euro keyset can only be copied to another Euro keyset, and a non-Euro type only to an-
other non-Euro type.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Open programming and select 720
Display shows
2. Enter the station number to copy to (e.g., 205)
OR
Press UP or DOWN keys to make selection and
press RIGHT soft key to move cursor
3. Enter station number to copy from (e.g., 203) and cursor
returns to step 2
OR
Press UP or DOWN keys to make selection
4. Press RIGHT soft key to return to step 2
OR
Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
COPY KEY PROGRAMMING
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
None
MMC 107 Key Extender
MMC 721 Save Station Key Programming
MMC 722 Station Key Programming
MMC 723 System Key Programming
MMC 720 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[201] COPY KEY
FROM:NONE
[205] COPY KEY
FROM:NONE
[205] COPY KEY
FROM:203
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408