Mmc: 103 - Set Answer Mode - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 103
DESCRIPTION:
Allows the system administrator to change the answer mode of any keyset or DCS
32 Button Add-On Module (AOM). Each keyset or DCS 32 Button AOM can have its
answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are
answered by pressing the ANS/RLS key or by lifting the handset.
1. AUTO: After giving a short attention tone, the keyset will automatically answer
calls on the speakerphone. When a C.O. line is transferred to a keyset
in Auto Answer, the screened portion of the call will be Auto Answer,
but the keyset or AOM will ring when the transfer is complete if the user
has not pressed the ANS/RLS key or lifted the handset.
2. VOICE: The keyset will not ring. After a short attention tone, callers can make
an announcement but the ANS/RLS key or handset must be used to
answer calls.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 103
Display shows
2. Dial keyset number (e.g., 205)
OR
Press UP or DOWN to select keyset
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select All.
Home Page
SET ANSWER MODE
DISPLAY
[201] ANS MODE
RING MODE
[205] ANS MODE
RING MODE
[ALL] ANS MODE
?
Table of Contents
PROGRAMMING
PART 2 JUNE 2006