Samsung DCS Programming Manual page 166

DCS
COMBINED PROGRAMMING MANUAL
2 UNCONDITION
Note: When a group is called, or a caller is transferred to a group, ringback is sent to the caller. A busy sig-
nal will not be returned even if all group members are busy. Calls to a group do not follow the call forward-
ing instructions of any stations in the group.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 601
Display shows
2. Dial group number (e.g., 505)
OR
Press UP or DOWN key to select group and press LEFT
soft key to move cursor to type of group
3. Dial group type 0–4 (e.g., 1)
OR
Press UP or DOWN key to make selection and press
LEFT soft key to move cursor to 'TYPE'
3. Dial feature option number (0–5, e.g., 1)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
4. Dial ring option (0–2, e.g., 1)
OR
Press UP or DOWN key to make selection and press
LEFT soft key to move cursor back to RING or press
RIGHT soft key to return to step 2
5. Dial next feature option and continue
OR
Press UP or DOWN key to select option
OR
Press LEFT soft key to return to step 2
6. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
All the stations listed in the group will ring. (Busy stations will re-
ceive off-hook ring, if set in MMC 300.) The maximum number of
stations allowed to ring unconditionally for a group is: DCS= 32,
Compact II=10, 816=16, 408/408i=8.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Group Type: Normal
Ring Mode: Uncondition
Overflow: 000 Sec
MMC 601 (Page 2 of 3)
DISPLAY
[501] STN GROUP
TYPE:NORMAL GRP
[505] STN GROUP
TYPE:NORMAL GRP
[505] STN GROUP
TYPE:VMAA
[505] STN GROUP
RING:SEQUENTIAL
[505] STN GROUP
RING:DISTRIBUTE
[505] STN GROUP
RING:DISTRIBUTE
Grp Trsf: 000 Sec
Next Port: None
Grp Member: 01: (first station)
MMC PROGRAMS
NOVEMBER 2001