Mmc: 713 Lcr Modify Digit Table - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 713
3 3
DCS
Also referred to as Outdial Rules, this enables the system to add or delete a digit string or single
digit, if needed, to complete a call (e.g. adding a digit "1"). The characters Q and # can also be
entered.
Option
Number of digits to delete
Insert (before dialling string)
Append (after dialling string)
Digit String Key
Insert String + Digit String (delete) + Append String
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 713
Display shows
2. Enter index number (e.g., 005)
OR
Press UP or DOWN keys to make selection and
press RIGHT soft key to move cursor
3. Enter number of digits to delete (e.g. 2)
OR
Press RIGHT soft key to skip step and move cursor to
step 4
4. Enter digits to be inserted (e.g., 10288)
OR
Press RIGHT soft key to skip step or to store information and
advance to step 5
5. Enter digits to be appended (e.g., 45678)
OR
Press RIGHT soft key to skip step or to store
information and return to step 2
6. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
LCR MODIFY DIGIT TABLE
3 3
CI CII
Max No. of Digit Entries
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Depends on software version
MMC 710 LCR Digit Table
MMC 711 LCR Time Table
MMC 712 LCR Route Table
MMC 713 (Page 1 of 1)
3 3 3 3
816 408i
15
14
14
DISPLAY
LCR MODIFY (001)
NOF DEL DGT:00
LCR MODIFY (005)
NOF DEL DGT:00
LCR MODIFY (005)
NOF DEL DGT:02
LCR MODIFY (005)
I:10288
LCR MODIFY (005)
A:45678_
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408