Mmc: 500 System-Wide Counters - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 500
3 3
DCS
Used to set the values of the system counters. The counters are listed below with a brief descrip-
tion of each.
DIAL COUNTER
ALARM REMINDER
0
1 AUTO REDIAL
2 DISA CALL
3 DISA LOCK
4 NEW CALL
5 UCDS VISUAL
ALARM*
6 UCDS AUDIO
ALARM*
7 UCD CS LEVEL 1*
8 UCD CS LEVEL 2*
* Options 5–8 are not available on 408/408i systems.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
SYSTEM-WIDE COUNTERS
3 3 3 3
CI CII
DESCRIPTION
The number of times that an alarm reminder will ring a station
before cancelling. RANGE = 1–99.
The number of times the system will redial an outside number
after the auto redial feature has been activated. RANGE = 1–15.
Sets the maximum number of internal calls that can be made
after accessing a DISA line. RANGE = 1–99.
Number of attempts the system will allow to incorrectly access a
DISA line before locking out the DISA line. RANGE = 1–99.
Number of times the system will allow a user to signal New Call
on a C.O. line during one call. RANGE = 1–99.
Used to set the Visual Alarm threshold. It is triggered when the
number of calls waiting to be answered in the UCD group
reaches this value. RANGE = 0–25.
Used to set the Audio Alarm threshold. It is triggered when the
number of calls waiting to be answered in the UCD group
reaches this value. RANGE = 0–25
Provides call wait indication level 1 if number of calls waiting to
be answered in UCD group reaches this value. RANGE = 0–25.
Provides call wait indication level 2 if number of calls waiting to
be answered in UCD group reaches this value. RANGE = 0–25.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
MMC 500 (Page 1 of 2)
3 3 3 3
816 408i
MMC PROGRAMS
NOVEMBER 2001
3 3
408