Samsung DCS Programming Manual page 225

DCS
COMBINED PROGRAMMING MANUAL
Note: The call progress tones will automatically be set to the default values if the SMDI VMS SET option in
MMC 210 is turned on.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
"A"
"B"
"C"
Keys "A"– "F" are keys #19–24 (24B keysets) or keys #7–12 (12B keysets) or keys #1–6 (6B
keysets)
ACTION
1. Open programming and select 726
Display shows
2. Enter the option number from above list (e.g., 4
— for other options, see steps 4–11)
OR
Press UP or DOWN key to make selection
Press LEFT soft key to move cursor
3. Enter 1 for YES or 0 for NO
OR
Press UP or DOWN key for selection
Press RIGHT soft key to return to step 2
4. If option 0 is selected at step 2
5. If option 1 is selected at step 2
6. If option 2 is selected at step 2
7. If option 3 is selected at step 2
TONES
0. DIAL TONE
1. BUSY TONE
2. RINGBACK TONE
3. DND NO MORE
4. HDSET ANSWER
5. SPKER ANSWER
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used in some fields where a value is entered or deleted.
Used to input alpha character "A"
Used to insert alpha character "B"
Used to insert alpha character "C"
MMC 726 (Page 2 of 3)
MMC PROGRAMS
NOVEMBER 2001
DISPLAY
EXT FOR DN1
YES
SEPARATOR
NO
SEPARATOR
YES
EXT FOR DN1
YES
TRK FOR DN1
YES
EXT FOR DN2
NO
TRK FOR DN2
NO