Mmc: 744 Dect Registration On/Off - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 744
3 3
DCS
Allows DECT handset registration to be enabled on a keyphone system. If this MMC is not
opened and an attempt is made to register a DECT handset, an error message will be displayed.
The default passcode for registration can be changed using MMC 202, Change Feature Pass-
codes.
Caution: When you have finished registering handsets, run this MMC again to set the regis-
tration mode to DISABLE. This will prevent unauthorised access to this feature.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 744
Display shows
2. Enter passcode
If the correct code is entered the display shows
An incorrect code entry shows
If the SYSTEM ID in MMC 737 (DECT System Code) has
not been set, this message will be displayed:
3. Dial 1 for ENABLE or 0 for DISABLE
OR
Press UP or DOWN key to select and press RIGHT
soft key
4. Press TRSF key to exit
OR
Press SPEAKER button to store and advance to next
MMC
Default Data:
Related Items:
DECT REGISTRATION ON/OFF
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
DISABLE
MMC 202 Change Feature Passcodes
MMC 737 DECT System Code
MMC 738 DECT Clear Registration
MMC 739 BSI Download
MMC 741 BSI Card Restart
MMC 742 BSI Status
MMC 743 DBS Status
MMC 745 BSI Carrier
MMC 744 [DCS / Compact II] (Page 1 of 1)
3 3 7 7
816 408i
DISPLAY
ENABLE DECT REG.
PASSCODE:
ENABLE DECT REG.
PASSCODE:[[[[
ENABLE DECT REG.
DISABLE
ENABLE DECT REG.
PASSCODE ERROR
ENABLE DECT REG.
NO REG. SYSTEM ID
ENABLE DECT REG.
ENABLE
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408