Mmc: 205 Assign Loud Bell - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 205
3 3
DCS
Designates the station that controls the loud bell ring output of one of the following:
DCS systems—a Trunk A card. Each Trunk A card has one loud bell output; these outputs are
given a Directory Number of 3901–3920 as a default value to enable them to be assigned.
Compact II systems—a Misc card (assigned in MMC 219, Common Relay Service Type).
816 and 408/408i systems—a base board (assigned in MMC 219, Common Relay Service
Type).
The loud bell will follow the ring cadence of the designated station. Only a station can be as-
signed to control the loud bell; a station group cannot be assigned.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 205
Display shows current setting
2. Dial loud bell number (e.g., 362)
OR
Use UP or DOWN to scroll through loud bell
numbers and press RIGHT soft key to move the cursor
3. Enter station number (e.g., 201)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ASSIGN LOUD BELL
7 7
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Clears previous entry
NONE (Unassigned)
MMC 219 Common Relay Service Type
MMC 205 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[361] LOUD BELL
RING PAIR : NONE
[362] LOUD BELL
RING PAIR : NONE
[362] LOUD BELL
RING PAIR :201
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408