Use Of Wild Cards And The Allowance Table - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
Stations with Toll Levels F or G applied will have no restrictions.

Use of Wild Cards and the Allowance Table

The Wild Card Table in MMC 704 appears as follows.
WILD CARD
X
Y
Z
The digits 0–9, * and # are values that each of the wild cards X, Y and Z can take. This is
explained later. (You are also unlikely to use any wild card apart from X.)
In the Deny Table, the STD code 01 has been barred to users with a B or E Toll level. It may,
however, be necessary to allow some STD codes to be dialled. For example, the codes
01869, 01993, and 01235 are codes local to Oxford and you may want users in the Oxford
area to have access to these codes, with all other STD codes barred. You can achieve this
using the Wild Card Table and Toll Allowance Table as follows:
Delete entry 006 in the Deny Table and add the following entry:
ENTRY
006
and in the Toll Allowance Table make the following entries:
ENTRY
001
002
003
In the above table, any station assigned a Toll level B, C, D or E will be allowed to dial only
01869, 01993 and 01235 numbers, but all other STD codes will be barred. Stations with a
Toll level F or G will be barred from dialling all STD codes.
The changes necessary in the Wild Card Table to implement these requirements are shown
below, where the Wild Card character X represents any value between 0 and 9 (i.e. a "1" is
placed in the field for any value that X is allowed to represent).
WILD CARD
X
Y
Z
0 1 2 3
0 0 0 0
0 0 0 0
0 0 0 0
TOLL DENY TABLE
DIGITS
01XXX
TOLL ALLOWANCE TABLE
DIGITS
01869
01993
01235
0 1 2 3
1 1 1 1
0 0 0 0
0 0 0 0
3–7
4 5 6 7
0 0 0 0
0 0 0 0
0 0 0 0
B C
1 1
B C
1 1
1 1
1 1
4 5 6 7
1 1 1 1
0 0 0 0
0 0 0 0
SPECIAL APPLICATIONS
NOVEMBER 2001
8 9 * #
0 0 0 0
0 0 0 0
0 0 0 0
D E F G
1 1 0 0
D E F G
1 1 0 0
1 1 0 0
1 1 0 0
8 9 # *
1 1 0 0
0 0 0 0
0 0 0 0