Mmc: 300 Customer On/Off Per Station - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 300
3 3
DCS
Allows the following features to be enabled on individual stations.
ACCESS DIAL
MICROPHONE
OFF-HOOK RING
SMDR PRINT
TGR ADV.TONE
VMAA FORWARD
STN CALL PRT
FWD DLY USE
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
CUSTOMER ON/OFF PER
STATION
3 3 3 3
CI CII
Determines whether a user can select a trunk or trunk group by dial-
ling its directory number (DN). This selection should be turned OFF
when using LCR.
Allows keyset to be used in speakerphone mode.
Allows a short burst of ring tone to indicate another call.
When this is set OFF, C.O. calls to and from the station will not print
on SMDR. This includes transferred calls or calls picked up from
hold or park.
When this feature is set to ON, a warning tone will be heard each
time LCR advances to the next route.
When this feature is set to ON, it allows calls to be forwarded to
voice mail.
Allows print out of station to station call.
When this feature is set to ON, calls will overflow to Forward No An-
swer destination when the Forward No Answer timer expires even
when the Forward No Answer feature is not activated at the called
party extension.
Set Forward No Answer destination in MMC 102, Call Forward, but
do not enable the feature. (Alternatively, use code 603 plus the sta-
tion number, then code 600 to cancel the feature.)
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
MMC 300 (Page 1 of 2)
3 3 3 3
816 408i
MMC PROGRAMS
NOVEMBER 2001
3 3
408