Mmc: 418 Card Restart - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 418
3 3
DCS
Enables any changes you make in MMC 417 (PRI-CRC4 Option), MMC 419 ( BRI Option), MMC
420 (PRI Option) or MMC 423 (S/T Mode) and applies them, as appropriate, to each BRI or PRI
card that you restart.
Note: PRI is not available on 816 or 408i systems.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 418
Display shows
2. Enter first trunk number in ISDN card (e.g. 701)
OR
Press UP or DOWN key to select first trunk number
and press RIGHT soft key to move cursor
3. Press UP or DOWN key to select YES or NO and
press RIGHT soft key
(If you select NO, system returns to step 2)
4. You are asked to confirm your selection
Enter 1 for YES or 0 for NO
OR
Press UP or DOWN key to select and press RIGHT
soft key
(If you select YES, the card is restarted)
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
CARD RESTART
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
None
MMC 417 PRI CRC4 Option (DCS & Compact II)
MMC 419 BRI Option
MMC 420 PRI Option (DCS & Compact II)
MMC 423 S/T Mode
MMC 418 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[701] RESTART
CARD RESTART ? NO
[701] RESTART
CARD RESTART ? NO
[701] RESTART
CARD RESTART ? YES
[701] RESTART
ARE YOU SURE ? YES
MMC PROGRAMS
NOVEMBER 2001
3 3 7 7
408