Mmc: 806 Card Pre-Install - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 806
3 3
DCS
Allows the pre-programming of a slot for a specific card. For example, after the system is i n -
stalled and a new card is added, running this program causes the system to accept the card for
what it is and not for what it is not.
The procedure differs slightly for each type of system, as described below.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
DCS PROCEDURE
n
ACTION
1. Open programming and select 806
Display shows
2. Enter cabinet number (e.g., 3)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
3. Enter slot number (e.g., 5)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
COMPACT II PROCEDURE
n
ACTION
1. Open programming and select 806
Display shows
2. Press UP or DOWN key to select slot number
3. Press RIGHT soft key to change previous card type
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
CARD PRE-INSTALL
3 3 3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
MMC 806 (Page 1 of 2)
3 3 7 7
816 408i
DISPLAY
C1–01 :INSTALL
PRITRK
C3–01 :INSTALL
PRITRK
C3–05 :INSTALL
DLI
DISPLAY
O.SLI SLOT
O.2SLI
EXP.1 SLOT
6DLI
EXP.1 SLOT
8DLI
MMC PROGRAMS
NOVEMBER 2001
7 7
408
PRITRK
PRITRK
DLI
O.2SLI
8DLI
8DLI