Samsung DCS Programming Manual page 149

DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
RECALL WAIT: This is the time any recall (hold or transfer) continues to recall at your station before
it recalls to the operator.
SMDR START/DIAL PULSE (ROTARY): This grace period timer starts SMDR recording for rotary
dialling. This timer also controls the LCD duration timer on the keysets. The duration time displayed
and the SMDR time duration will be the same.
SMDR START/DTMF: This grace period timer starts SMDR recording for touchtone dialling. This
timer also controls the LCD duration timer on the keysets. The duration time displayed and the SMDR
time duration will be the same.
SYS HOLD RECALL: Determines the time calls can be left on hold before recalling the holding sta-
tion. Setting timer to 000 means no recalling will take place.
TRANSFER RECALL: Determines the time that transferred calls ring before recalling. S ee Recall
Wait Time.
UCDS AUDIO ALARM: Determines how long the longest waiting call can be held before the system
gives an audio alarm to the UCD supervisor.
UCDS VISUAL ALARM: Determines how long the longest waiting call can be held before the system
gives a visual alarm to the UCD supervisor.
VMS UCD MSG: Not used in UK.
VOICE DIAL DELAY: Monitors the duration of the interaction between main software and Voice Dial-
ler.
MMC 501 (Page 6 of 6)