Mmc: 506 Tone Cadence - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 506
3 3
DCS
Sets and changes tone cadences on a system-wide
below. Tones can be set to 'interrupt' or 'continuous', and interrupt tone cadences can be cus-
tomised. Some systems may require default settings to comply with local operating companies.
FEATURE KEYS
DIAL 0 INTERRUPT TONE
DIAL 1 CONTINUOUS TONE
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
TONES
BUSY TONE
CONFM/BARGE
DIAL TONE
DND/NO MORE
ERROR TONE
HOLD/CAMPON
MSGWAT TONE
RGBACK TONE
RING TONE
TRSFER TONE
DID RNGBACK
CO BUSY
CO RINGBACK
CO DIAL
ACTION
1. Open programming and select 506
Display shows
2. Press UP or DOWN key to select tone (e.g. TRSFER)
and press RIGHT soft key
3. Dial 0 for INTERRUPT tone or 1 for CONTINUOUS
tone
OR
Press UP or DOWN key to select and press RIGHT soft
key
TONE CADENCE
3 3 3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Busy tone
Confirm tone and Barge-in tone
Dial tone
DND tone and No More Call key tone
Error tone
Hold tone and Camp-on tone
Message waiting tone
Ringback tone
Ring over page tone (to external page port)
Transfer dial tone
AC15 ringback tone (not 408 systems)
CO Busy tone
CO Ringback tone
CO Dial tone
MMC 506 (Page 1 of 2)
3 3 3 3
816 408i
basis. There are 14 tones available, as listed
DISPLAY
BUSY TONE
INTERRUPT TONE
TRSFER TONE
INTERRUPT TONE
MMC PROGRAMS
NOVEMBER 2001
3 3
408