Mmc: 601 Assign Station Group - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 601
3 3
DCS
Assigns stations to groups. This provides more flexibility, for example, if using Uniform Call Dis-
tribution (UCD/ACD), AA GROUP and VM/AA applications. A station, common bell, and ring page
can be in more than one group, but must all be the same ring type. The maximum members per
group for each system is:
DCS
48
Note: A device for announcement, if used, must provide a hookflash and return the call to the group.
UCD GROUPS
Maximum number of UCD groups that can be programmed is as follows.
DCS:10, created from last 10 station groups (520–529)
Compact I—10, created from any station group (501–529)
Compact II – 5, created from the last 10 station groups (510–519)
816 – 3, created from the last 3 station groups (507–509)
GROUP TYPES
0 NORMAL GROUP
1 VMAA GROUP*
2 UCD GROUP*
3 AA GROUP*
4 CADENCE*
(* Options not available on 408/408i systems)
Other possible entries for DCS systems only are:
3801–3820 COM. BELL
3601–3640 RING PAGE
FEATURE KEY
0 TYPE
1 RING
2 OVERFLOW
3 GRP TRSF
4 NEXT PORT
5 MEMBER
RING MODES
0 SEQUENTIAL
1 DISTRIBUTE
ASSIGN STATION GROUP
3 3 3 3
CI CII
816 Compact I/Compact II
16
Can only have distribute or sequential ringing
Has wrap-up capability
Can only have distribute or sequential ringing
Can only have distribute or sequential ringing
This device is a common bell relay on a Trunk A card.
This device is ring over an external page zone output of a Trunk A
card.
Group type (Normal, VM/AA, UCD, AA)
Ring mode (see Ring Modes, below)
Overflow time
Group transfer time
Overflow port
Group member (e.g., station 202)
The first idle station listed in the group will ring. If the first is
busy, the next idle station will ring.
The first call will ring the first station listed in the group. The next
call will ring the next station listed in the group.
MMC 601 (Page 1 of 3)
3 3 3 3
816 408i
408/408i
30 8
MMC PROGRAMS
NOVEMBER 2001
3 3
408