Mmc: 304 Assign Station/Trunk Use - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 304
3 3
DCS
Allows trunks, on a per-station basis, to answer incoming calls, to dial out or to do both. If a sta-
tion is set to DIAL:NO, the station will not have the ability to place a call. If the station is set to
ANS:NO, the station cannot answer an incoming call.
Note: MMC 406, Trunk Ring Assignment, overrides this MMC for the Answer option.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Open programming and select 304
Display shows
2. Dial the station number (e.g., 205)
OR
Press UP or DOWN key to select station and press
RIGHT soft key
3. Dial the trunk ID number (e.g., 704)
OR
Press UP or DOWN key to select trunk and press
RIGHT soft key
4. Press UP or DOWN key to select YES/NO option
OR
Dial 1 for YES or 0 for NO and press RIGHT soft key
to move cursor to ANS option
Press UP or DOWN key to select YES/NO
Option
OR
Dial 1 for YES or 0 for NO and press RIGHT soft key
to return to step 2
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ASSIGN STATION /
TRUNK USE
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
DIAL = YES
ANS = YES
MMC 316 Copy Station Usable
MMC 406 Trunk Ring Assignment
MMC 722 Station Key Programming
MMC 723 System Key Programming
MMC 304 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[201] USE [701]
DIAL:YES ANS:YES
[205] USE [701]
DIAL:YES ANS:YES
[205] USE [704]
DIAL:YES ANS:YES
[205] USE [704]
DIAL:NO ANS:YES
[205] USE [704]
DIAL:NO ANS: NO
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408