Mitsubishi Electric HD-6000 Owner's Manual page 84

Operation of PIP and POP
You can display programs from analog channels, analog inputs or devices as Pictureqn-Picture (PIP) and Picture-
Outside-Picture (POP). The HDTV receiver/controller has a second analog tuner for non-scrambled analog channels
received on Ant-1 and will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as
the main picture but cannot be the sub-picture. PC screens can be viewed in the side-by-side mode.
Press HPiPOP to activate the HPiPOP option. With
each press of the HP/POP button on the HD-6000
remote control (within seconds of each other), the PIP/
POP will cycle through the following display options:
. POP
side-by-side
MAIN pictures
PICTURE Side-by-Side
POP 1
MAIN
PICTURE POP 2
POP 3
• 3 POP
POP 1 POP 2 POP 3
MAtN POP 4 POP 5 POP 6
PICTURE
POP 7 POP8 POP 9
• 9 POP
Ar_t-I 2 XYO0(
StAndard
Stereo SAP
TV-PG DLSV
SQVI
• PiP large
Ant-12 XX_SK
Slandard
Ster_> SAP
TWPG DLSV
SQV1
PIP Ant-1 17
• PiP small
Ant-12 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQVl
• PIP/POP off
84
To turn PIP/POP off, wait at least 10 seconds, and
press PIP/POP. The next time you activate PIP/POP,
the last used PIP/POP option will be displayed
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed.
Changing PIP/Side-by-Side CharmeJs
Press PIP CH to scroll up and down through
memorized channels on Ant-1 and Ant-2.
Exchanging Program images
Press EXCH to exchange the main picture and the PIP/
POP picture. Pictures from digital channels can only
be shown as the main picture.
Moving PiP image
If no menus are onscreen, press ADJUST A V, 4 or_
to move the PIP display anywhere on the main screen.
Automatic POP Switching
When automatic POP switching is active, the TV will
cycle through memorized analog channels on Ant-1 or
Ant-2 or strobe pictures from other AiV components
in the POP display. Press PAUSE to pause or restart
automatic POP switching.
SeJecting POP "Live" Image
Press ADJUST A, V, _ or _" to select a different POP
"live" image (automatic POP switching must be paused.)
Freezing the ProPand Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side
images. Press PAUSE again to return to a "live" image.
IMPORTANT
Side-by-Side cannot show the same channem or
device on both sides,
If Ant-1 or Ant=2 is the main picture, Ant-2 is not
availabme as a PiP, POP or Side-by-Side.
PIP/POP is not compatibme with signams from
media cards.
if TV Pause is set to "Always" PIP/POP and Side-
-Side are not available.