Mitsubishi Electric HD-6000 Owner's Manual page 73

High definition receiver/controller
Hide thumbs Also See for HD-6000:
Table of Contents

Advertisement

Antenna
Menu, continued:
SuperQuickView
TM
(SQV)
SQV (SuperQuickView
TM)
Using The Menu Screen
Figure 15
SQV (SuperQuickView TM)allows you to put together
banks of your favorite channeb from Antenna 1 and
Antenna 2_ You can store channeis in any of the 9
different SQV memory banks.
You can aiso store the
same channei in muifipb memory banks. Once you
have added a channei to an SQV memory, "SQV" and
the memory bank number will appear under the tuned
channei number on the TV screen.
Adding
SQV Channels
1_ Sebct the channei using the "ChanneP option box
or press CH • or V.
2_ Highiight the bank (SQV1-SQV9).
3_ Press ENTER to check mark the selected SQV
memory bank.
4. Repeat for additional channels or banks.
Removing
SQV Channems
1. Highlight the box for the SQV bank number.
2_ Press ENTER to remove the check mark.
Figure !5. Antenna Menu, SQV (SuperQuickView)
SQV (SuperQuickView
TM)
Using The Remote Control
Viewing
and changing
SQV banks using the remote
control:
1. Press the SQV button.
2_ To change memory banks, press a number
button within 5 seconds of pressing the SQV
button.
3. Press the SQV button repeatedly to cycle through
the channels available in that bank.
Adding
SQV channels
using the remote control:
1_ Press CH •,
• or number buttons to select the
channel you want to add to the current SQV memory
bank.
2. Press and hold the SQV button
for about
2 seconds.
When "SQV"
and the memory
bank number
appear
under the channel
number,
the channel
has
successfully
been added.
Removing
SQV channems
using
the remote
controm:
1. Press the SQV button
and then the memory
bank
number.
2. Press the SQV button repeatedly until you see the
desired channel.
3_
While the channel number and SQV indicator (with
correct bank number) are still displayed on the
screen, press the CANCEL button.
If the CANCEL
button is not pressed before the SQV indicator
disappears automatically, the channel wiii not be
removed.
4. When the SQV indicator
disappears,
the channel
has successfully
been removed
only from that bank.
"Other"
banks
remain
unchanged.
73

Advertisement

Table of Contents
loading

Table of Contents