Change; Deuete Devices; Finish Screen - Mitsubishi Electric HD-6000 Owner's Manual

Edit NetCommand ®, Change or Delete Devices, Finish Screen
Change Device Screen
Figure 24
SeHecflng Change from the Setup menu screen,
dispHays the Change screen. To change a device,
seHect the device by name, not type. You can change
the name or input connections to the HDTV receiver/
controller and AiV receiver. If "Other" is seHected for
the manufacturer then you can aHso"Learn". The rest
of the screens that follow are the same as when you
Add a device.
Figure 24, Change screen
Finish Screen
Figure 26
To finaHize your seHecfions and compHete the
NetCommand setup, seHect Finish from the Finish
screen.
Note: To change any of the inputs or names
for the devices, or add devices not included in
the initial settings, select Edit to display the Edit
NetCommand menu.
DeJete Device Screen
Figure 25
Selecting DeHetefrom the Setup menu, dispHays the
Delete screen. You can choose to delete a single
device by selecting the device you would like to
delete, or you can delete the entire NetCommand
configuration. After you have chosen the device, or
the entire configuration, you will be prompted to
confirm your choice to delete. If you select the Entire
Configuration, the Initial button becomes available on
the Edit NetCommand screen. If you delete a device
that you learned the remote control signals for the
learned signals are erased.
Figure 25. Delete screen
Figure 26, Finish screen
IMPORTANT
NetOommand does not allow you to delete
a device or change the connections for a
device (like a VCR or a DVD player} if the
device (input} is currently being displayed by
the TV.
Switch the ND-6000 to a different device
from the one you are changing or deleting.
To change the A/V receiver, you need to be
listening to the TV speakers.
52